Give your Raspberry Pi Pico Compact Cable-Retainer Case project a purpose-built printed home with practical access and a clean GearTechOutpost finish.
Functional design
- Built-in cable retainer reduces strain on soldered project wiring
- Compact fastened shell for portable or permanently wired builds
- Direct USB access without opening the enclosure
- Brass inserts make repeated opening more durable than screws driven into plastic
Compatibility
Designed for a Raspberry Pi Pico with USB access and a roughly 5.5 mm cable outlet. Confirm your cable diameter and board connector before ordering.
What is included
Printed case, four M3 brass inserts, and four M3 x 8 mm socket-head screws. Pico board, USB cable, project cable, and electronics are not included.
Print construction
Hardware follows the source design: four M3 heat-set inserts and four M3 x 8 mm cap screws.
Made by GearTechOutpost
Printed to order and inspected for obvious print defects before shipment. Layer lines and small surface variations are normal features of fused-filament fabrication.
Designer and license
Design by flummer. Source: Printables model page. Licensed under CC BY-SA 4.0. GearTechOutpost is not affiliated with the designer.
Compatibility statements are based on the designer’s source listing; this development listing is awaiting GearTechOutpost physical fit validation.
Raspberry Pi and other marks belong to their respective owners and are used only to describe compatibility.
Reviews
There are no reviews yet.